The cabinet beneath a sink can hide a slow leak for weeks. A quick visual inspection every month or two can help you notice moisture, corrosion or loose connections before the cabinet or nearby flooring is damaged.
1. Clear the cabinet and look for moisture
Remove stored items so you can see the cabinet floor, back wall and pipework. Look for dark patches, swollen wood, peeling shelf lining, mineral marks or a musty smell. These signs can point to a leak even when no water is actively dripping.
2. Inspect the visible supply lines
Look at the flexible or rigid lines that bring water to the faucet. Check for rust, green or white deposits, kinks, cracks and dampness around the connection points. Do not force a fitting or tighten a corroded connection; older valves and lines can fail when disturbed.
3. Check the drain and trap
Examine the drain tailpiece, curved trap and visible joints. Place a dry paper towel beneath the connections, then run water for a short time while watching for fresh moisture. If the sink has an overflow, fill the basin only enough to check that area without leaving it unattended.
4. Check the faucet base and cabinet edges
Water can travel down the faucet body or splash behind the basin. Dry the area, run the faucet and look around its base and the countertop seam. Also check the cabinet sides and floor for signs that water is entering from outside the plumbing cabinet.
5. Know which warning signs need help
- Water keeps appearing after you dry the area.
- A shut-off valve is heavily corroded, stuck or leaking.
- You notice a strong sewage odor or repeated drain backups.
- The cabinet floor is soft, swollen or visibly damaged.
- Water is near an outlet, wiring or an appliance.
For an active leak, turn off the relevant shut-off valve only if it operates easily and safely. If it is stuck or the leak continues, use the home’s main shut-off valve if you can access it safely and contact a licensed plumber.
Inspection tip: take a photo of the pipework during a dry inspection. Comparing it with a later check can make new corrosion, movement or moisture easier to spot.


